Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 0.078125'' ID, 0.140625'' OD, 0.03125'' Wall, 50 Foot Coil, 1/EA - STHT-C-078-1F
Saint-Gobain - SaniTech-C Tubing, 0.078125" ID, 0.140625" OD, 0.03125" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 1'' ID, 1.375'' OD, 0.1875'' Wall, 25 Foot Coil, 1/EA - STHT-C-1000-5
Saint-Gobain - SaniTech-C Tubing, 1" ID, 1.375" OD, 0.1875" Wall, 25 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 1'' ID, 1.5'' OD, 0.25'' Wall, 50 Foot Coil, 1/EA - STHT-C-1000-6F
Saint-Gobain - SaniTech-C Tubing, 1" ID, 1.5" OD, 0.25" Wall, 50 Foot Coil, 1/EA
Norell Inc THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 12.78mm OD X 12mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
THIN-WALL TRANSPARENT FLUOROPOLYMER FEP TUBING, 12.78mm OD X 12mm ID, 12 in. LENGTH, PACKED IN LOTS OF 4
Foxx Life Sciences Imaweld Heat Sealable and Weldable TPE Tube 6.35mm (1/4") ID X 9.5mm (3/8") OD, 50 FT
Imaweld is thermoplastic elastomer opaque tubing designed for fluid transfer in pharmaceutical and biotech applications. Imaweld is specially formulated which meets requirement of pharmaceutical industries with superiority compare to PVC and Silicone.• Free of any toxic ingredients. successfully meets toxicity free requirements.• Manufactured and Packaged in Clean Room Class of ISO 9001, ISO 14001 and OHSAS 18001 certified facility• Heat sealable and weldable to facilitate sterile connection• Working Temperature Range -40°C to +135°C• USP Class VI Certification• TSE/BSE CertificationAll standard dimensions are in mm and Inch dimensions are for reference only.
Accuflow Systems MFLEX SILICONE TUB. #13 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex platinum-cured silicone tubing, L/S 13, 25 ft. Ensure optimal performance from your Masterflex pump. Slightly greater clarity than peroxide-cured tubing; smooth surfaces; lower protein bind
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 1/4"" X 3/8"" - 50 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
Helix Medical Inc TUBING SIL .188 X .313 50FT
Platinum cured, non-implantable, non-adherent tubing for bio/pharma industry standards. Ability to operate at elevated temperatures. Will not oxidize/deteriorate. Can be sterilized with autoclave, ethylene oxide, or gamma.
Metrohm USA TEFLON TUBE
For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
Hach Company Tubing, Tygon, R-3606, 6.4 mm (I.D.)
Chemical-resistant, Formula R-3603 Tygon tubing with flex strength greater than rubber. Unaffected by oxidizing agents and compatible with virtually any laboratory chemical. Bends readily to sharp radius curves and will maintain strong grip on glass or metal. Highly polished bore prevents interior build-up while facilitating cleaning.
Med Vet International Red Rubber Cuffed Endotracheal Tube 5.5mm, J0148G
Available in .5mm increments from 2.5 to 16.0mm. Murphy eye. Red rubber. Hard-to-find extra-large size now available. (adaptor not included except where specified)
Waters Corp Tubing, Green Teflon, 1/16 in ID, 25 ft Length
Waters Tubing, Green Teflon, 1/16 in ID, 25 ft Length